Cleaning a toilet is nobody’s favorite chore, but it goes fast once you know the order of operations and which products belong where. Here’s the 10-minute routine, the one part of the toilet that needs a gentler touch than you’d think, and how to go full deep-clean when a stomach bug moves in.

What you need

  • Disposable or dedicated rubber gloves
  • Dish soap or an all-purpose cleaner with soap or detergent
  • A toilet bowl cleaner and a toilet brush
  • A soft cloth or sponge (or paper towels) for the seat and outside
  • An EPA-registered disinfectant or regular unscented household bleach, for when you want to disinfect[1, 2]

Open a window or run the fan first. The CDC recommends good ventilation whenever you use disinfectants indoors, plus gloves or goggles if the label calls for them.[1, 2]

Clean first, then disinfect

These are two different jobs. Cleaning with soap or detergent, water, and scrubbing physically removes germs and grime, and on its own it removes most harmful viruses and bacteria from a surface.[1] Disinfecting uses chemicals to kill the germs that are left. Always clean first: dirt left on a surface makes it harder for a disinfectant to reach and kill germs.[1]

For a routine weekly clean, soap and scrubbing is usually enough. The CDC says disinfecting at home matters most when someone in the house is sick or has a weakened immune system.[1, 2]

The 10-minute toilet routine

  1. Flush with the lid down. A flush throws tiny droplets into the air; researchers filming a lidless commercial toilet saw them reach about 5 feet within 8 seconds.[8] Starting with the lid down keeps that spray in the bowl.
  2. Put bowl cleaner in the bowl, then lift the seat and lid. Squirt it under the rim and let it sit while you do the outside. Seat makers advise keeping the seat and lid up while strong cleaners or bleach are in the bowl, so the fumes and splashes don’t damage the seat’s finish.[7]
  3. Wipe the outside, top to bottom. Start with the flush handle (the part everyone touches), then the tank, the lid, the outside of the bowl, and the base, so drips fall onto areas you haven’t cleaned yet.
  4. Do the seat: top, underside, and hinges. Details below, because the seat wants different treatment than the bowl.
  5. Scrub the bowl. Work the brush around the bowl and up under the rim, where buildup hides, then flush to rinse.
  6. Finish strong. Rinse the brush with the clean flush water and let it drip dry over the bowl before putting it away, toss the gloves or wash them, and wash your hands with soap and water for 20 seconds.[1]

How to clean the toilet seat without wrecking it

The bowl is glazed porcelain. The seat is plastic or painted wood, and it’s more delicate than it looks. Kohler recommends dish soap and water on a soft sponge or cloth, a rinse, and a dry with a soft towel, and warns that abrasive chemicals can damage the finish.[6] Bemis, one of the biggest seat makers, goes further: warm soapy water and a soft cloth only, with no harsh abrasives or cleaners containing bleach or alcohol, including general bathroom cleaners and wipes, because they can damage the seat surface and hinges.[7]

  • Wipe the top, the underside, and the bumpers. The underside catches the splashes nobody sees.
  • Get into the hinges. Many seats have quick-release hinges that let you lift the seat off for a full clean; Kohler suggests a utility sink for that, then letting the hinge area air-dry completely.[6] An old toothbrush dipped in soapy water reaches the gap around the bolts.
  • Wipe up urine splashes quickly. Bemis recommends wiping them away with water right away rather than letting them sit on the seat.[7]
  • Painted wood seats are the most delicate; Kohler says to use only a mild detergent like dish soap.[6]

If someone is sick and you want to disinfect the seat, read your seat maker’s care instructions and the disinfectant’s label first, then rinse it with a damp cloth when the contact time is up so nothing is left to sit on the finish.

Disinfecting: contact time is the whole trick

A quick spray-and-wipe often doesn’t disinfect anything. Every disinfectant needs to stay on the surface long enough to kill germs, which is called the contact time, and the surface has to stay wet that whole time.[1] You’ll find it in the label directions.

To make a basic bleach solution the CDC way:

  • Use regular unscented household bleach with 5% to 9% sodium hypochlorite. Splashless and some laundry bleaches aren’t right for disinfecting.[2]
  • If the bottle has no directions, mix 5 tablespoons (1/3 cup) of bleach per gallon of room-temperature water, or 4 teaspoons per quart.[2]
  • Leave it on for at least 1 minute if the bottle gives no contact time, and keep the surface visibly wet.[2]
  • Mix a fresh batch each day; diluted bleach loses strength after 24 hours.[2]

The combos you should never mix

This is the one rule that’s about your lungs, not your toilet. Never mix bleach with other cleaners or disinfectants: the vapors can be very dangerous to breathe.[2]

  • Bleach plus acids makes chlorine gas. Acids include vinegar and many toilet bowl cleaners, along with rust and lime removers.[4, 5]
  • Bleach plus ammonia makes chloramine gases. Ammonia is in some glass cleaners, and it’s also in urine, so Washington State’s health department specifically flags care when using bleach on toilet bowls.[4]

That’s why “a splash of bleach on top of the bowl cleaner for good measure” is a bad idea. Pick one product, flush between products if you switch, and keep the room ventilated. If you do breathe in fumes, Poison Control says to leave the area right away and get fresh air, and to get medical care if you have trouble breathing.[5]

After a stomach bug: the deep clean

Norovirus, the classic stomach bug, is very contagious and spreads through vomit and poop, and the virus can keep showing up in poop for 2 weeks or more after someone feels better.[3] When someone has vomited or had diarrhea, the CDC’s cleanup steps are:

  1. Put on rubber or disposable gloves, wipe up the whole area with paper towels, and throw them away in a plastic trash bag.[3]
  2. Disinfect with a stronger bleach solution than the everyday mix, 5 to 25 tablespoons of household bleach per gallon of water, or with an EPA-registered disinfectant that works against norovirus, following the label.[3]
  3. Leave the bleach on for at least 5 minutes.[3]
  4. Clean the whole area again with soap and hot water, then wash any soiled laundry, take out the trash, and wash your hands.[3]

Hand sanitizer doesn’t work well against norovirus, so soap and water is the move for hands.[3] For the sick person’s side of things, see food poisoning vs. stomach flu and how to stop diarrhea fast.

How often should you clean it?

The CDC’s general advice is to clean high-touch surfaces regularly and other surfaces when they look dirty, and more often if you live with young children or anyone more likely to get sick.[1] For most homes, that adds up to a weekly toilet clean, a quick wipe of the handle and seat in between, and a full disinfect when a bug is going around.

The bottom line

Lid down, bowl cleaner in, outside top to bottom, gentle on the seat, scrub the bowl, wash your hands. Disinfect when someone’s sick, give it the full contact time, and never mix bleach with anything else. Curious how worried to be about public toilet seats? We covered that in can you catch anything from a toilet seat? And when you’re out and need a restroom you can trust, the DookieMaps map has you covered.