You walk into a public restroom, pick a stall, and there it is: a door that stops a foot above the floor and a crack by the hinge just wide enough to make eye contact with a stranger. Visitors from abroad find it baffling, and plenty of Americans do too. But the gaps aren’t an accident. They’re the result of a pile of practical decisions about mops, money, emergencies, and wheelchairs, and once you know them, the design starts to make a strange kind of sense.

Why do bathroom stalls have gaps under the door?

Here are the real reasons, roughly in order of how much they matter.

1. Cleaning is faster

A raised partition lets a mop, a wet vacuum, or a hose sweep under every stall without opening a single door.[2, 10] Keeping laminate and wood-veneer panels up off the floor also keeps them away from mop water, which can wick into the core and make them swell and peel.[2] The idea goes way back: Mental Floss credits Frank Lloyd Wright, who used short, raised partitions in the Larkin Building in Buffalo, New York, to make floors easier to clean, and the approach spread through office construction from there.[1, 9]

2. Floors slope to a drain

Commercial restroom floors often tilt toward a floor drain so they can be washed down. A door that reached the floor would scrape on that slope, so even a half-inch to one-inch gap is usually needed just to let the door swing.[2]

3. Someone can help you in an emergency

If a person faints, has a seizure, or overdoses in a fully enclosed stall, nobody may notice for a long time. With a gap, people nearby can see that something’s wrong, and a first responder can reach in or crawl under to unlock the door instead of breaking it down.[1, 10] The same goes for a lock that jams: you have an escape hatch.[10]

4. Air moves, and smells don’t pile up

Open tops and bottoms let the room’s ventilation reach every stall. A sealed cubicle may need its own airflow, like an extra exhaust fan or louvered door, to stay fresh.[1, 2] Fully enclosed stalls can also change what a building needs for lighting and fire sprinklers, since a stall that reaches the ceiling may need its own.[2]

5. Standard sizes are cheaper

Partition doors and panels come in standard heights, so suppliers don’t have to custom-measure every bathroom.[1] The sizes are tuned to waste as little material as possible. One manufacturer explains that its raw sheets are 120 inches long, so two standard 58-inch doors come out of one sheet with almost no scrap, while a 61-inch door could cost close to twice as much because only one fits per sheet. Those standard heights are why floor gaps usually land around 9 or 12 inches.[2]

6. Wheelchair users need the toe space

This one’s a legal requirement. Under the 2010 ADA Standards, a wheelchair-accessible stall needs toe clearance of at least 9 inches above the floor under the front partition and at least one side partition, extending at least 6 inches past the partition. In stalls designed for kids, it’s 12 inches, because a child’s wheelchair footrests sit higher.[3, 4] That space gives footrests room to swing while someone turns and transfers. Full-height walls are allowed, but then the stall has to be built bigger to make up for it.[3, 4] Regular stalls don’t have this rule, so in theory they could sit much lower.[2]

7. It discourages misbehavior

Owners of busy public restrooms have a less charming reason, too. A stall that feels a little exposed is a poor place for drug use, sex, vandalism, or settling in for the afternoon.[1, 10]

8. You can tell when a stall is taken

And yes, the gap is a low-tech occupancy sensor. In a 2024 survey of 1,003 U.S. adults by partition maker Bradley, 74% said they’d used the gap under a door to check whether someone was already inside.[7] Bonus feature: it’s also how you get toilet paper passed over from the next stall when your roll runs out.[10]

What about the crack by the hinge?

That slit along the side of the door is a different story. Standard partitions are built in a factory and assembled on site between walls that are rarely perfectly straight or square. Installers leave clearance on the hinge and latch sides so the door can swing without binding against the post.[9] Nobody designed it for peeking; it’s leftover wiggle room, and it’s the detail people complain about most.

Does the building code require gaps?

No. The International Building Code, the model code most U.S. states and cities build on, says each toilet used by the public or employees must sit in a separate compartment with walls or partitions and a door “to ensure privacy.” It sets no height for that door or those walls.[5] Urinal dividers do get numbers: they have to start no more than 12 inches off the floor and reach at least 60 inches up.[5] The 2021 edition also added a rule that the restroom itself must be screened from view of the entry door, mirrors included, so passersby in the hallway can’t see in.[5, 6]

In other words, the gaps come from cost, maintenance, and habit, not from a law that demands them. Your local code may add its own wrinkles, but floor-to-ceiling stalls are legal across the U.S.

Why do European stalls go to the floor?

Head to Germany or the U.K. and the stall is often a little private room: panels from floor to ceiling, a door that closes flush, and little or no floor gap. U.S. partitions, by comparison, are typically 55 to 72 inches tall and mounted around a foot off the floor.[8] Part of the difference is how they’re built. European restrooms have long used cubicles built into the room, while the U.S. market grew up on fast, prefabricated panels that are cheap to ship and forgiving to install.[9]

Are American stalls changing?

Slowly, yes. In Bradley’s 2024 survey, 70% of Americans said public restroom stalls don’t give enough coverage, 58% wanted the gaps around doors and walls eliminated, and 45% wanted doors that reach the floor.[7] Manufacturers have responded with overlapping door edges that close the side crack, panels mounted lower to the floor, and full-height systems, showing up mostly in new offices, hotels, hospitals, airports, and stadiums.[8, 9] Since full doors would kill the under-door peek, 96% of those surveyed said a red-or-green occupancy indicator on the door would help.[7]

How to get more privacy in a gappy stall

  • Pick an end stall. You’ll have one neighbor instead of two, and you’re not alone: 40% of Americans head for the stall farthest from the entrance.[7]
  • Check the latch before you commit. A broken lock is a top complaint; 74% of women in the Bradley survey said they’d had to hold a stall door shut with their foot.[7]
  • Mind the crack. Hang your bag or coat on the hook so it covers the hinge-side gap, or angle yourself away from it.
  • Go for the single-user room. Family and all-gender restrooms with a lockable door are full rooms, not stalls, and they’re a great option if you need more time.

If public restrooms make it hard to go at all, you’re in good company. Our guide to shy bowel has practical fixes, and how to poop at work covers the office version. Curious about what’s on that seat? Read whether you can get sick from a toilet seat, and for more bathroom history, see who really invented the flush toilet and World Toilet Day.

The bottom line

Stall gaps exist because they make restrooms faster to clean, cheaper to build, easier to ventilate, safer in an emergency, and usable for wheelchair users, with a side of deterring mischief. The code doesn’t require them, and a growing number of buildings are closing them up. Until your favorite spot catches up, pick the end stall and hang your coat over the crack. And when you need the nearest restroom, including ones with private single rooms, DookieMaps finds it in a tap.